Snappi Toddler Diaper Fasteners Single Pack
Size 2 - Toddler Snappi® Fasteners are longer across the top "T" of the
Snappi®. Once stretched correctly, the Snappi® fastener can stretch 4" further
than the Size 1 Snappi® fitting comfortably up to a 30" waist.
AGE RECOMMENDATION: Although this depends largely on the
size and shape of the toddler, we recommend trying the Size 2 Toddler Snappi®
for toddlers aged 18 months+
Snappi's are a great alternative for parents who prefer a little extra hold but don't like using diaper pins. They work best with twill/gauze diapers such as prefolds, contoured or any other diapers would normally require pins. They do not work well with tightly woven diapers such as flannel diapers.
The stretchy plastic gripper teeth grab and hold the diaper into place, making it easy to use without the worry of sticking the baby or yourself.
How to use directions
|
Snappis WORK BEST with Snappi terry cloth diapers, cotton prefolds
(Chinese or DSQ), and other cloth diapers with a loose enough weave for
the Snappi to hook into. They DO NOT work well with flannel or any other
tightly woven diapers, even most hemp diapers.
WARNING:
1. ALWAYS use a cover when using a Snappi fastener on your baby's
diaper.
2. Keep out of children's reach when not in use!
3. Do not use your Snappi for longer than 6 months.
4. Do not leave your Snappi lying in the sun as it is not UV resistant
and can reduce the effectiveness of the Snappi.
CARE: Clean your Snappi in hot soapy water. Do not launder them
with diapers in the washer as this may weaken the grip attachment.
CAUTION: Any tear in the Snappi can lead to separation of a
piece, presenting a possible choking hazard. Do not cut your Snappi as
this could create weak spots in your Snappi. Inspect your Snappi before
each use and discontinue use immediately if there is any sign of
cracking, tearing, breakage or wear of the teeth or any other parts.
|
 |
|
DIRECTIONS FOR USE:
Snappi fasteners need to be used correctly in order to work effectively.
1. STRETCH the Snappi fastener before its first use. The stretching
triggers the 'memory' of the Snappi to return to its original size and
in so doing, pulls the diaper together to the middle to allow for a snug
fit. This is essential for the Snappi to work properly. This can be done
by holding the Snappi in the center with one hand and close to the end
of the leg with the other hand. Then s-t-r-e-t-c-h a few times (10 or
so). As you do this you should feel how the material 'softens' or gets
more elastic. Follow this stretching procedure with each leg. The Snappi
is now ready to go!
2. Make sure that the Snappi is ATTACHED SECURELY. It is important that
the Snappi 'leg' being attached be stretched across the diaper before
hooking it into the diaper. So,
Hook Left,
Stretch ACROSS and Hook Right,
Stretch DOWN and Hook Center
In other words, the Snappi fastener should go from a 'T' shape to a 'Y'
shape.
By following these instructions, the Snappi should be secure, the diaper
will fit snugly and the baby should not be able to undo it. ALWAYS place
a cover over the diaper and Snappi fastener. |
|
The Snappi fastener is manufactured from FDA approved raw materials, a
polyester based polyurethane which is degradable on aging through
hydrolysis and/or microbiological attack. It contains NO latex or any
other adulterant, dilutent or modifying polymers. The composition is
100% polyurethane. It is made in South Africa. |
When the Snappi fastener is not in use, fold the
thin strip at the end of each leg to the back of the Snappi, and slip over the
teeth of the white grip. This acts as a barrier and prevents the sharp teeth
from being exposed.
NOTE: Keep all Snappi fasteners out of children's reach when not in use.
.jpg)
